North West Motorcycle Direct

The Tour-X 4 must be one of the most versatile helmets ever: adventure, grand touring or off road, and without the peak looks pretty good on a naked bike too! No matter the riding conditions, the Tour-X 4 is ready for it. Can be used without visor with goggles, without peak but with visor, any way that suits you.

Manufacturer: Arai
Part number: 110010
Helmet Style: Plain
Available in Sizes: XS-XL
Colour: White
Finish: Gloss

Available in sizes

HELMET SIZEXSSMLXL
Head Circ. Cm53-5455-5657-5859-6061-62

Versatile options

Your choice: wear the Tour-X 4 with or without peak, with or without visor and combinations of these two. The large visor opening offers plenty of room for motocross-style goggles when riding without the visor.

Outer shell SFL

(Super Fibre Laminate) This is the basic Arai outer shell. Super fibre provides more comfort? than other shell materials, yet is still strong and lightweight.

Replaceable interior

Complete removable interiors that may be cleaned with mild soap and lukewarm water, rinse well and let it dry for a day, never in clothes dryer, direct sunlight or near a stove. Different size thicknesses are available to fit those in-between sizes for a custom fit for every rider.

Complete removable interiors that may be cleaned with mild soap and lukewarm water, rinse well and let it dry for a day, never in clothes dryer, direct sunlight or near a stove. Different size thicknesses are available to fit those in-between sizes for a custom fit for every rider.

To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds.

5mm ’’Peel Away’’

5mm thick removable foam layer on the ear cups/cheek pads and temple pads. Offering more room if desired without the need to purchase an optional headliner or new pads/ ear cups.

Emergency Release System

Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury.

Innovative peak

The Arai peak scavenges and forces air into the forehead vent ports for cooling while at the same time using multiple relief-ports to reduce “lifting” at higher speeds.

Ventilation

Easy to clean diffusers create a strong venture vacuum at the rear. Dual intake for increased airflow and lower noise level. Under-peak air intake collects and directs cool air into the helmet. Closable chin vent controls the airflow to the chin area. Inner chin vent shutter prevents debris coming into the helmet in dusty riding conditions. Brow ventilation, lower side vents and neck roll exhaust.

Five times inspected

Each Arai helmet goes through five separate quality-control departments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections.

Washable interior

The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water

Handmade

It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours.

All-day comfort

All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai.

Penetration tested

All Arai helmets are penetration tested, (except Freeway-2, Penta, Astro-Light and VX-Pro Jr) although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet.

Double-D ring device

The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener.

Rounder, smoother, stronger shell

The outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact.

Stronger outer shell, softer inner shell

Arai uses a stronger outer shell to spread impact forces and a softer inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component.

Organic shape

The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head’s natural shape for improved comfort, fit and to help minimize wind turbulence.

5-year limited warranty

All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture.

Different outer shells

Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for.

Arai In-house test

This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05.

Product
Helmets Offroad
Colour Black
Helmets
Finish Gloss
Helmet Model TOUR-X 4
Style Plain

Arai TOUR-X 4 Frost Black Helmet

    Arai
  • Brand: Arai
  • Product Code: 1100***
  • £439.99

  • Ex Tax: £439.99

Finance options

Loan Amount
Duration
Deposit (%)
Deposit (£)
Monthly Payments
Interest Rate
Cost of Credit
Total Payable

* Finance is not available in conjunction with coupon or voucher codes. Other restrictions may apply.

How to apply for finance

Want to know more or wish to apply for finance? Please contact our finance department using the options listed below.

Message request

Send message

Call the team

Ring our finance department 09:00-17:00 Monday to Friday.

Telephone: 01253 845021

Visit us instore

Call in person at one of our outlets.


Available Options